Commission Implementing Regulation (EU) 2026/2116 of 8 September 2026 granting a Union authorisation for the biocidal product family Christeyns Peracetic Acid Biocidal Product Family in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

of 8 September 2026

granting a Union authorisation for the biocidal product family ‘Christeyns Peracetic Acid Biocidal Product Family’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

(Text with EEA relevance)

Preamble

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products ¹ , and in particular Article 44(5), first subparagraph, thereof,

Whereas:

(1) On 15 September 2017, Christeyns NV submitted an application to the European Chemicals Agency (‘the Agency’) in accordance with Article 43(1) of Regulation (EU) No 528/2012 for Union authorisation of a biocidal product family named ‘Christeyns Peracetic Acid Biocidal Product Family’ of product-types 2, 3 and 4, as described in Annex V to that Regulation, providing written confirmation that the competent authority of the Netherlands had agreed to evaluate the application. The application was recorded under case number BC-AT033914-26 in the Register for Biocidal Products.

(2) ‘Christeyns Peracetic Acid Biocidal Product Family’ contains peracetic acid as the active substance included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 2, 3 and 4.

(3) On 12 March 2025, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency.

(4) On 2 October 2025, the Agency submitted to the Commission its opinion ² , the draft summary of the biocidal product characteristics (‘SPC’) of ‘Christeyns Peracetic Acid Biocidal Product Family’ and the final assessment report on the biocidal product family, in accordance with Article 44(3) of Regulation (EU) No 528/2012.

(5) The opinion concludes that ‘Christeyns Peracetic Acid Biocidal Product Family’ is a biocidal product family within the meaning of Article 3(1), point (s), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(6) of that Regulation.

(6) On 20 October 2025, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.

(7) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for ‘Christeyns Peracetic Acid Biocidal Product Family’.

(8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,

HAS ADOPTED THIS REGULATION:

Article 1

A Union authorisation with authorisation number EU-0035834-0000 is hereby granted to Christeyns NV for the making available on the market and use of the biocidal product family ‘Christeyns Peracetic Acid Biocidal Product Family’ in accordance with the summary of the biocidal product characteristics set out in the Annex.

The Union authorisation is valid from 15 October 2026 until 30 September 2036.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union .

Final provisions

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 8 September 2026. For the Commission The President Ursula VON DER LEYEN

¹ OJ L 167, 27.6.2012, p. 1 . ELI: http://data.europa.eu/eli/reg/2012/528/oj .

² ECHA opinion of 11 September 2025 on the Union authorisation of ‘Christeyns Peracetic Acid Biocidal Product Family’ (ECHA/BPC/496/2025), https://echa.europa.eu/opinions-on-union-authorisation .

Christeyns Peracetic Acid Biocidal Product Family

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

PT04: Food and feed area

PT03: Veterinary hygiene

Authorisation number EU-0035834-0000

R4BP asset number EU-0035834-0000

PART I

FIRST INFORMATION LEVEL

1. ADMINISTRATIVE INFORMATION

1.1. Family name

1.2. Product type(s)

1.3. Authorisation holder

1.4. Manufacturer(s) of the product

1.5. Manufacturer(s) of the active substance(s)

2. PRODUCT FAMILY COMPOSITION AND FORMULATION

2.1. Qualitative and quantitative information on the composition of the family

2.2. Type(s) of formulation

PART II.

SECOND INFORMATION LEVEL META SPC(S)

1. META SPC 1 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 1 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 1 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 1

2.2. Type(s) of formulation of the meta SPC 1

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 1.1 – PT2 hard non-porous surface disinfection, trigger spraying and wiping

4.1.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger spray: Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface.

Assure that the surface is completely wet and remains wet during the required contact time. No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use

4.1.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 1.2 – PT4 hard non-porous surface disinfection, trigger spraying and wiping

4.2.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger spray: Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface.

Assure that the surface is completely wet and remains wet during the required contact time.

Treated surfaces or objects that may come into contact with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use

4.2.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 3 months

Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 2 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 2 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 2 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 2

2.2. Type(s) of formulation of the meta SPC 2

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 2.1 – PT2 hard non-porous surface disinfection, trigger spraying and wiping

4.1.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger Spray: Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface.

Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.1.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

Keep unprotected people away from treated surfaces until dry.

Hygiene measures: Wash hands after handling the product.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 2.2 – PT4 hard non-porous surface disinfection, trigger spraying and wiping

4.2.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger spray: Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface.

Assure that the surface is completely wet and remains wet during the required contact time.

Treated surfaces or objects that may come into with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.2.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

Keep unprotected people away from treated surfaces until dry.

Hygiene measures: Wash hands after handling the product.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 3 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 3 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 3 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 3 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 3

2.2. Type(s) of formulation of the meta SPC 3

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 3.1 – PT2 hard non-porous surface disinfection, trigger spraying

4.1.1. Use-specific instructions for use

Trigger spraying of hard non-porous surfaces

Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.1.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See section 6 for the full titles of the European Standard and Council Directive.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user.

Hygiene measures: Wash hands after handling the product.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 3.2 – PT4 hard non-porous surface disinfection, trigger spraying

4.2.1. Use-specific instructions for use

Spray the product directly onto the hard non-porous surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Treated surfaces or objects that may come into contact with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.2.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See Section 6 for the full titles of the European Standards and Council Directive.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user.

Only for treatment of small surfaces (up to 0,5m 2 ).

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 3.3 – PT2 toilet bowl disinfection, trigger spraying

4.3.1. Use-specific instructions for use

Toilet bowl disinfection by trigger spraying

Spray the product directly onto the surface to be treated and let dry or scrub off after the required contact time. If necessary, scrub the product over the surface with a toilet brush to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between applications and the next use of the treated surface.

Place a warning sign during disinfection.

4.3.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See section 6 for the full titles of the European Standards and Council Directive.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 166 - Eye protection against chemicals

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 4 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 4 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 4 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 4

2.2. Type(s) of formulation of the meta SPC 4

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 4.1 – PT2 hard non-porous surface disinfection, trigger spraying and wiping

4.1.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger spray: Spray the product directly onto the surface to be treated, spread the product with a wipe or cloth and let dry or wipe off after the required contact time.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

In case of heavy soiling, first clean the surface before applying as above.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use.

4.1.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 4.2 – PT3 hard non-porous surface disinfection, trigger spraying

4.2.1. Use-specific instructions for use

Trigger spraying of open surfaces

Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Only for use on non-porous surfaces.

Comply with the instructions for use.

4.2.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

The product should not be used in the presence of animals.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 4.3 – PT4 hard non-porous surface disinfection, trigger spraying and wiping

4.3.1. Use-specific instructions for use

Trigger spraying and wiping of hard non-porous surfaces

Trigger spray: Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out.

Wiping (trigger spray into the wipe): The product can also be sprayed on a wipe and then applied on the surface.

Assure that the surface is completely wet and remains wet during the required contact time.For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Treated surfaces or objects that may come into contact with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use.

4.3.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Only for treatment of small surfaces (up to 0,5m 2 ).

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 5 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 5 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 5 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 5

2.2. Type(s) of formulation of the meta SPC 5

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 5.1 – PT2 hard non-porous surface disinfection, trigger spraying

4.1.1. Use-specific instructions for use

Trigger spraying of hard non-porous surfaces

Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.1.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Only for treatment of small surfaces (up to 0,5m 2 ).

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See Section 6 for the full titles of the European Standard and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 5.2 – PT4 hard non-porous surface disinfection, trigger spraying

4.2.1. Use-specific instructions for use

Trigger spraying of hard non-porous surfaces

Spray the product directly onto the surface to be treated and let dry or wipe off after the required contact time. If necessary, wipe the product over the surface with a wipe or cloth to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Treated surfaces or objects that may come into contact with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

4.2.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Only for treatment of small surfaces (up to 0,5m 2 ).

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See Section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 5.3 – PT2 toilet bowl disinfection, trigger spraying

4.3.1. Use-specific instructions for use

Toilet bowl disinfection by trigger spraying:

Spray the product directly onto the surface to be treated and let dry or scrub off after the required contact time. If necessary, scrub the product over the surface with a toilet brush to spread it out. Assure that the surface is completely wet and remains wet during the required contact time.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Place a warning sign during disinfection.

4.3.2. Use-specific risk mitigation measures

Ensure that application is carried out in well-ventilated areas.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Only for treatment of small surfaces (up to 0,5m 2 ).

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

The use of eye protection according to EN166 or equivalent during handling of the product is mandatory.

Wear protective chemical resistant gloves according to EN374 or equivalent during handling of the product is mandatory. See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 166 - Eye protection against chemicals

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 6 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 6 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 6 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 6

2.2. Type(s) of formulation of the meta SPC 6

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 6.1 – PT2 hard non-porous surface disinfection, low-pressure spraying/foaming, 0,5-2 % (v/v) dilutions

4.1.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (according to EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

— Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Respiratory equipment when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. Routine use (0,5 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Special Use (2 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation 3 ACH or ≥ 300 m3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (0,75-0,8 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 6.2 - PT4 hard non-porous surface disinfection, low-pressure spraying/foaming, 0,5-2 % (v/v) dilutions

4.2.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size > 100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

m 3 For re-entry, the undercut of AECinhalation of 0.5 mg peracetic acid/m 3 and 1.25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use and dairy industry (0.5 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Routine Use (0.75-0.8 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Special Use (2 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation 3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory. In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 6.3: PT2 Disinfection of objects and equipment by dipping, 0,5-2 % (v/v) dosage

4.3.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.3.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size > 100-300 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.4. Use description

Table 4

Use 6.4: PT4 Disinfection of objects and equipment by dipping, 0,5-2 % (v/v) dosage

4.4.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.4.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

See Section 6 for the full titles of the European Standards and Council Directive.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size > 100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 7 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 7 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 7 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 7

2.2. Type(s) of formulation of the meta SPC 7

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 7.1 – PT2 hard non-porous surface disinfection, low-pressure spraying/foaming, 0,5 % (v/v) dosage

4.1.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Routine use (0,5 % (v/v) dilution):

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

In rooms ≥ 100 m 3 and ventilation 3 ACH or ≥ 300 m 3 and ventilation 1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

See section 6 for the full references to the titles of the European Standards and the Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 7.2 – PT3 hard non-porous surface disinfection, low pressure spraying/foaming, 0,5 % (v/v) dosage

4.2.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

Foam enough liquid to keep the surface wet during the required contact time.

Only for use on non-porous surfaces.

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Do not use near livestock.

Only use in empty animal housing.

Keep unprotected people away from the treated room/vehicle. If it is necessary to be present for the bystander, wear same PPE as the professional user.

Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Routine use (0.5 % (v/v) dilution):

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

In rooms ≥ 100 m 3 and ventilation 3 ACH or ≥ 300 m 3 and ventilation 1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 7.3 – PT4 hard non-porous surface disinfection, low pressure spraying/foaming, 0,5 % (v/v) dosage.

4.3.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

Foam enough liquid to keep the surface wet during the required contact time.

4.3.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Routine use (0,5 % (v/v) dilution):

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.4. Use description

Table 4

Use 7.4: PT2 Disinfection of objects and equipment by dipping, 0,5 % (v/v) dosage

4.4.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.4.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. Manual mixing and loading in room size >100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.5. Use description

Table 5

Use 7.5: PT4 Disinfection of objects and equipment by dipping, 0,5 % (v/v) dosage

4.5.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.5.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 18 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 8 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 8 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 8 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 8

2.2. Type(s) of formulation of the meta SPC 8

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 8.1: PT2 Cleaning-in-place (CIP), 0,3-2 % (v/v) dosage

4.1.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 8.2: PT4 Cleaning-in-place (CIP), 0,3-4,8 % (v/v) dosage

4.2.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use.

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information)..

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Rinse treated surfaces/equipment/ pipes/machinery with drinking water after application.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 8.3 – PT2 hard non-porous surface disinfection, low-pressure spraying, 0,5-2 % (v/v) dosage

4.3.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1.25 mg/m3 (0.9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organizational measures (e.g. sensor, defined ventilation period).

4.3.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

m 3 For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,5 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Special Use (0.8-1 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (2 % (v/v) dilution):

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.4. Use description

Table 4

Use 8.4 – PT3 hard non-porous surface disinfection, low-pressure spraying, 0,5-5 % (v/v) dosage

4.4.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

Only for use on non-porous surfaces.

4.4.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Keep unprotected people away from the treated room/vehicle. If it is necessary to be present for the bystander, wear same PPE as the professional user.

Do not apply in rooms smaller than 100 m 3 .

m 3 For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Routine use (0,5 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Special Use (5 % (v/v) dilution):

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Do not touch treated surface until they are dried.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

See section 6 for the full titles of the European Standards and Council Directive.

4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.5. Use description

Table 5

Use 8.5– PT4 hard non-porous surface disinfection, low-pressure spraying, > 0,5-4,8 % (v/v) dosage

4.5.1. Use-specific instructions for use

Low-pressure foaming or spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1.25 mg/m3 (0.9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organisational measures (e.g. sensor, defined ventilation period).

4.5.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

m 3 For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,5 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Special Use (0.8-1 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (2 % (v/v) dilution):

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: - Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (4.8 % (v/v) dilution):

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Do not touch treated surface until they are dried.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

See section 6 for the full titles of the European Standards and Council Directive.

4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.6. Use description

Table 6

Use 8.6 - PT2 Whole room fogging

4.6.1. Use-specific instructions for use

Whole room Fogging (dry fogging)

Mixing and loading:

Fill the fogging equipment with undiluted product.

Application:

Place the fogging equipment into the room and place the plug into the socket. Adjust the settings of the equipment to the product and room volume (Dosage: 5,02 ml/m 3 ). Switch on the equipment and leave the room. The equipment allows for some time to leave the room before it starts fogging. Close all doors and windows tightly. The equipment is switched off automatically after the required application time.

Required contact time: 4 hours after diffusion

Cleaning of equipment can be done with water.

The user shall always carry out a microbiological validation of the disinfection in the rooms to be disinfected (or in a suitable “standard room”, if applicable) with the devices to be used, after which a protocol for disinfection of these rooms can be made and used thereafter.

4.6.2. Use-specific risk mitigation measures

Mixing and loading:

Keep unprotected people away during mixing and loading.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application:

During the diffusion, keep the room closed and do not enter in. Treatment should be conducted with no human or animals present.

— All gaps present in the room (e.g. window frame) from where fog may leak must be sealed beforehand.

— Ensure that access to the vapor-treated area is denied during the whole procedure with a warning sign.

— The professional user shall enter the room only in emergency situations when the hydrogen peroxide level has dropped below 36 ppm (50 mg/m 3 ) wearing mandatory the following Personal protective equipment (PPE): Respiratory protective equipment (RPE) with Assigned Protection Factor (APF) 40 (Type of RPE to be specified by the authorisation holder within the product information) and suitable protective equipment (gloves, eye protection, coverall). A built-in meter (calibrated sensor) must be used to ensure that the concentration of hydrogen peroxide has decreased below 0,9 ppm or a lower relevant national reference value for airborne hydrogen peroxide. Unprotected persons or animals may re-enter the treated room only after the hydrogen peroxide concentration in air decreases lower than 1,25 mg/m 3 (0,9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide.

See section 6 for the full titles of the European Standards and Council Directive.

4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.7. Use description

Table 7

Use 8.7 - PT4 Whole room fogging

4.7.1. Use-specific instructions for use

Whole room Fogging (dry fogging)

Mixing and loading:

Fill the fogging equipment with undiluted product.

Application:

Place the fogging equipment into the room and place the plug into the socket. Adjust the settings of the equipment to the product and room volume (Dosage: 5,02 ml/m 3 ). Switch on the equipment and leave the room. The equipment allows for some time to leave the room before it starts fogging. Close all doors and windows tightly. The equipment is switched off automatically after the required application time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Required contact time: 4 hours after diffusion.

Cleaning of equipment can be done with water.

The user shall always carry out a microbiological validation of the disinfection in the rooms to be disinfected (or in a suitable “standard room”, if applicable) with the devices to be used, after which a protocol for disinfection of these rooms can be made and used thereafter.

4.7.2. Use-specific risk mitigation measures

Mixing and loading:

Keep unprotected people away during mixing and loading.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application:

During the diffusion, keep the room closed and do not enter in. Treatment should be conducted with no human or animals present.

— All gaps present in the room (e.g. window frame) from where fog may leak must be sealed beforehand.

— Ensure that access to the vapor-treated area is denied during the whole procedure with a warning sign.

— The professional user shall enter the room only in emergency situations when the hydrogen peroxide level has dropped below 36 ppm (50 mg/m 3 ) wearing mandatory the following Personal protective equipment (PPE): Respiratory protective equipment (RPE) with Assigned Protection Factor (APF) 40 (Type of RPE to be specified by the authorisation holder within the product information) and suitable protective quipment (gloves, eye protection, coverall).e- A built-in meter (calibrated sensor) must be used to ensure that the concentration of hydrogen peroxide has decreased below 0,9 ppm or a lower relevant national reference value for airborne hydrogen peroxide. Unprotected persons or animals may re-enter the treated room only after the hydrogen peroxide concentration in air decreases lower than 1,25 mg/m 3 (0,9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide.

Rinse treated surfaces/equipment/ pipes/machinery with drinking water after application.

See section 6 for the full titles of the European Standards and Council Directive.

4.7.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.7.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.7.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.8. Use description

Table 8

Use 8.8: PT2 Disinfection of objects and equipment by dipping: 0,5-2 % (v/v) dosage

4.8.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.8.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

— Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.8.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.8.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.8.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.9. Use description

Table 9

Use 8.9: PT4 Disinfection of objects and equipment by dipping, 0,5-4.8 % (v/v) dosage

4.9.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.9.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size 30-100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Special Use (4,8 % (v/v) dilution):

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

See section 6 for the full titles of the European Standards and Council Directive.

4.9.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.9.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.9.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.10. Use description

Table 10

Use 8.12: PT4 Milking cluster disinfection by automatic flushing

4.10.1. Use-specific instructions for use

Milking cluster disinfection

Mixing and loading:

Open containers manually. Load the product into the CIP system of the milking installation or the milking robot.

Application:

Dose automatically into the milking cluster. Allow the required contact time at the corresponding temperature.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

There are no precautions to be taken to avoid the development of resistance.

4.10.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Rinse treated surfaces/equipment/ pipes/machinery with drinking water after application.

See section 6 for the full titles of the European Standards and Council Directive.

4.10.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.10.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.10.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.11. Use description

Table 11

Use 8.13 – PT2 Laundry disinfection

4.11.1. Use-specific instructions for use

Laundry disinfection

Mixing and loading:

Open containers manually. Load the product into the dosing system of the washing machine.

Application:

Dose automatically into the washing machine, during the main wash cycle when the required temperature has been reached. Allow the required contact time at the corresponding temperature.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.11.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.11.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.11.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.11.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight.

Shelf-life: 24 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 9 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 9 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 9 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 9

2.2. Type(s) of formulation of the meta SPC 9

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 9.1: PT2 Cleaning-in-place (CIP), 0,25-2 % (v/v) dosage

4.1.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Only automated mixing and loading is allowed.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 9.2: PT4 Cleaning-in-place (CIP), 0,25-2 % (v/v) dosage

4.2.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Only automated mixing and loading is allowed.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 30 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 15 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 10 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 10 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 10 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 10

2.2. Type(s) of formulation of the meta SPC 10

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 10

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 14.1: PT2 hard non-porous surface disinfection, wet wipes

4.1.1. Use-specific instructions for use

Wet wipes

Mixing and loading:

Not applicable, the product is ready-to-use.

Application:

Wipe over the hard non-porous surface to be disinfected, leave for the indicated contact time and let dry. Make sure to wet the surface completely. Only wet wipes are efficacious.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use.

4.1.2. Use-specific risk mitigation measures

Only for treatment of small surfaces (up to 0,5m 2 ).

Ensure that application is carried out in well-ventilated areas.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 14.2 – PT4 hard non-porous surface disinfection, wet wipes

4.2.1. Use-specific instructions for use

Wet wipes

Mixing and loading:

Not applicable, the product is ready-to-use.

Application:

Wipe over the hard non-porous surface to be disinfected, leave for the indicated contact time and let dry. Make sure to wet the surface completely. Only wet wipes are efficacious.

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Treated surfaces or objects that may come into contact with food, feed, drinks and ingredients thereof should be rinsed with potable water after disinfection.

No interval is required between applications of the biocidal product or between application and the next use of the treated surface.

Comply with the instructions for use.

4.2.2. Use-specific risk mitigation measures

Only for treatment of small surfaces (up to 0,5m 2 ).

Ensure that application is carried out in well-ventilated areas.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

If medical advice is needed, have product container or label at hand.

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 10

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

Keep out of reach of children and non-target animals/pets.

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 10

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 11 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 11 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 11 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 11

2.2. Type(s) of formulation of the meta SPC 11

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 11

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 11.1: PT2 Cleaning-in-place (CIP), 0,05-1 % (v/v) dosage

4.1.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 11.2: PT4 Cleaning-in-place (CIP) – 0,05-1 % (v/v) dosage

4.2.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Rinse treated surfaces/equipment/ pipes/machinery with drinking water after application.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 11.3 – PT2 hard non-porous surface disinfection, low-pressure spraying, 0,1-1,5 % (v/v) dosage

4.3.1. Use-specific instructions for use

Low-pressure spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1,25 mg/m3 (0,9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organisational measures (e.g. sensor, defined ventilation period).

4.3.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,1 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH: No RPE is needed.

Routine use (0.25 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation 3 ACH or ≥ 300 m 3 and ventilation 1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (1 % (v/v) dilution):

Do not touch treated surface until they are dried.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

Special Use (1,5 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 is mandatory.

See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.4. Use description

Table 4

Use 11.4 – PT2 Disinfection of objects and equipment by dipping, > 0,1-1,5 % (v/v) dosage

4.4.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.4.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application (dipping)(1,5 % (v/v))

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user.

See section 6 for the full titles of the European Standards and Council Directive.

4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.5. Use description

Table 5

Use 11.5 – PT4 hard non-porous surface disinfection, low-pressure spraying, 0,1-1,5 % (v/v) dosage

4.5.1. Use-specific instructions for use

Low-pressure spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1,25 mg/m3 (0,9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organizational measures (e.g. sensor, defined ventilation period).

4.5.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Do not use near livestock.

Only use in empty animal housing.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

m 3 For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organizational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,1 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH: No RPE is needed.

Routine use (0,2 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: No RPE is needed.

Routine use (0,25 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

In rooms ≥ 300 m 3 and ventilation ≥10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

Special Use (1 % (v/v) dilution):

Do not touch treated surface until they are dried.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

Special Use (1,5 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 is mandatory.

See section 6 for the full titles of the European Standards and Council Directive.

4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.6. Use description

Table 6

Use 11.6 – PT4 Disinfection of objects and equipment by dipping, 0,1-1,5 % (v/v) dosage - Meta SPC 11

4.6.1. Use-specific instructions for use

Disinfection of objects by dipping

Mixing and loading:

Open containers manually. Transfer the required amount of product to the dipping bath and add water.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection. Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Immerse the objects in the dipping bath during the required contact time. The disinfection bath (liquid) can be used only once and should be replaced after each use.

Treated objects that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.6.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE. providing a protection factor of at least

Special use (1-1,5 % (v/v) dilution):

Do not touch treated surface until they are dried.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information). Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

See section 6 for the full titles of the European Standards and Council Directive.

4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 11

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 9 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 11

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 12 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 12 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 12 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 12

2.2. Type(s) of formulation of the meta SPC 12

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 12

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 12.1: PT2 Cleaning-in-place (CIP) – 0,04-1,5 % (v/v) dosage

4.1.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.1.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size > 100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.2. Use description

Table 2

Use 12.2: PT4 Cleaning-in-place (CIP), 0,04-1,5 % (v/v) dosage

4.2.1. Use-specific instructions for use

Cleaning-In-Place (CIP)

Mixing and loading:

Open containers manually. Load the product into the dosing system of the CIP installation.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Thoroughly pre-clean the system. Any detergent used for cleaning should be rinsed with clean water. Treat piping systems and equipment by means of a circulating pump system as usual in a CIP system. The product is dosed automatically.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1.25 mg/m3 (0.9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organizational measures (e.g. sensor, defined ventilation period).

4.2.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Rinse treated surfaces/equipment/ pipes/machinery with drinking water after application.

See section 6 for the full titles of the European Standards and Council Directive.

4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.3. Use description

Table 3

Use 12.3 – PT2 hard non-porous surface disinfection, low-pressure spraying, 0,05-2 % (v/v) dosage

4.3.1. Use-specific instructions for use

Low-pressure spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

Thoroughly pre-clean surfaces and materials.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

Between application of the biocidal product and the next use of the product, no interval is required if the appropriate PPE is worn based on the use of the product. For re-entry without PPE, it should be ensured that the air concentration for hydrogen peroxide has dropped below the appropriate limit value, i.e. below 1,25 mg/m3 (0,9 ppm) or a lower relevant national reference value for airborne hydrogen peroxide with technical and organizational measures (e.g. sensor, defined ventilation period).

4.3.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Do not apply in rooms smaller than 100 m 3 .

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

m 3 For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,05 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: No RPE is needed.

Special Use (1 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 or 20 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

Special Use (1,5 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Special Use (2 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

See section 6 for the full titles of the European Standards and Council Directive.

4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.4. Use description

Table 4

Use 12.4 – PT4 hard non-porous surface disinfection, low-pressure spraying, 0,05-2 % (v/v) dosage

4.4.1. Use-specific instructions for use

Low-pressure spraying

Mixing and loading:

Open containers manually. Small containers are transferred manually into reservoirs or dilution vessels, while large containers are pumped into reservoirs via a pump.

Application:

For use in clean conditions, surfaces must be pre-cleaned before disinfection.

Thoroughly pre-clean surfaces and materials. Any detergent used for cleaning should be rinsed off with clean water. Remove excess water.

Apply the diluted product on the surface to be disinfected by means of foaming or spraying with the aid of low-pressure foaming or spraying equipment. When disinfecting, use as much liquid so that the surfaces remain completely wet during the required exposure time. Treated surfaces or materials that may come into contact with food, drinks and ingredients thereof should be rinsed thoroughly with potable water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.4.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Manual mixing and loading:

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Application

Only horizontal and downward spraying is allowed with a lance sprayer (> 1m).Do not use near livestock.

Only use in empty animal housing.

Keep unprotected people away from treated surfaces until dry. If it is necessary to be present for the bystander, wear same PPE as the professional user

Do not apply in rooms smaller than 100 m 3 .

For re-entry, the undercut of AECinhalation of 0,5 mg peracetic acid/m 3 and 1,25 mg hydrogen peroxide/m 3 or relevant lower national reference values shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).

Respiratory protection when needed: Use of respiratory protective equipment (RPE) according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

Routine use (0,05 % (v/v) dilution):

In rooms ≥ 100 m 3 and ventilation ≥3 ACH or ≥ 300 m 3 and ventilation ≥1 ACH: Use of respiratory protective equipment (RPE) with APF of at least 4 is mandatory.

In rooms ≥ 100 m 3 and ventilation ≥10 ACH or ≥ 300 m 3 and ventilation ≥3 ACH: No RPE is needed.

Special Use (1 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 100 m 3 with ventilation rate of at least 10 ACH or 300 m 3 with ventilation rate of at least 3 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 or 20 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

In rooms ≥ 100 m 3 and ventilation 10 ACH or ≥ 300 m 3 and ventilation 3 ACH: Use of respiratory protective equipment (RPE) with APF of at least 20 is mandatory.

In rooms ≥ 300 m 3 and ventilation 10 ACH: Use of respiratory protective equipment (RPE) with APF of at least 10 is mandatory.

Special Use (1,5 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Special Use (2 % (v/v) dilution):

Do not touch treated surface until they are dried.

Apply only in rooms of at least 300 m 3 with ventilation rate of at least 10 ACH.

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

Use of respiratory protective equipment (RPE) providing a protection factor of at least 20 is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

See section 6 for the full titles of the European Standards and Council Directive.

4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

4.5. Use description

Table 5

Use 12.5 – PT2 Laundry disinfection in washing machines

4.5.1. Use-specific instructions for use

Laundry disinfection

Mixing and loading:

Open containers manually. Load the product into the dosing system of the washing machine.

Application:

Dose automatically into the washing machine, during the main wash cycle when the required temperature has been reached. Allow the required contact time at the corresponding temperature.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

4.5.2. Use-specific risk mitigation measures

Use in well-ventilated places. Avoid breathing vapours.

The following personal protective equipment is mandatory. This is without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work:

Hand protection: Chemical resistant PVC/Nitril rubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Hygiene measures: Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Never return unused material to original container.

When handling product, avoid contact with eyes, skin and clothing.

Use specific risk mitigation measures for human health:

Mixing and loading:

Keep unprotected people away during mixing and loading.

Mixing and loading can only be performed in rooms of at least 100 m 3 .

Wear protective chemical resistant gloves meeting the requirements of European Standard EN 374 or equivalent during product handling phase (glove material to be specified by the authorisation holder within the product information).

The use of eye protection (chemical goggles) according to EN166 or equivalent during handling of the product is mandatory.

Wear a protective coverall (at least type 4) according to EN 14605 or equivalent which is impermeable for the biocidal product (coverall material to be specified by the authorisation holder within the product information).

Automated mixing and loading in room size >100 m 3 :

Use of respiratory protective equipment (RPE) providing a protection factor of at least 10 according to EN 14387 or equivalent is mandatory. At least a powered air purifying respirator with helmet, hood or mask (TH1 or TM1), or a half mask or full mask with combination filter gas/P2 is required (filter type (code letter, colour) to be specified by the authorisation holder within the product information). The user must be trained in the correct use of the prescribed RPE.

See section 6 for the full titles of the European Standards and Council Directive.

4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.

4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Collect all waste in suitable and labelled containers and dispose according to local legislation.

4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 12

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight.

Shelf-life: 24 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

The full titles of the EN standards referenced in sections where risk mitigation measures are listed should be stated in section 6 as:

EN 374 - Protective gloves against dangerous chemicals and micro-organisms

EN 14387 - Respiratory protective devices - Gas filters and combined filters for use as replaceable components in unassisted respiratory protective devices (RPD) with the exception of escape devices

EN 166 - Eye protection against chemicals

EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with spray-tight (Type 4) connections, including items providing protection to parts of the body only (Type PB [4]).

Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) ( OJ L 131, 5.5.1998, p. 11 ).

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 12

7.1. Trade name(s), authorisation number and specific composition of each individual product

1. META SPC 13 ADMINISTRATIVE INFORMATION

1.1. Meta SPC 13 identifier

1.2. Suffix to the authorisation number

1.3. Product type(s)

2. META SPC 13 COMPOSITION

2.1. Qualitative and quantitative information on the composition of the meta SPC 13

2.2. Type(s) of formulation of the meta SPC 13

3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 13

4. AUTHORISED USE(S) OF THE META SPC

4.1. Use description

Table 1

Use 13.1 – PT3 Teat dipping after milking

4.1.1. Use-specific instructions for use

Teat dipping after milking

Mixing and loading:

The product is ready-to-use. A no-spill dip cup should be used for manual teat dipping.

The product must be brought to a temperature above 20 °C before use. The lower reservoir is filled with the RTU product and the dip cup is screwed on top. Squeeze the lower reservoir to move the disinfectant into the upper reservoir to make sure that it’s sufficiently filled before dipping.

Application:

Dip each teat in the upper reservoir of the dip cup after milking. Leave the product on the teats until next milking.

Make sure that the full length of the teat (3-5 cm) is immersed into the disinfectant.

Top up with fresh disinfectant as needed. Allow to take effect for the indicated contact time by keeping animals standing up.

After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water.

Cleaning of equipment can be done with water.

No interval is required between application of the biocidal product or between application and the next use of the product.

See section 6 for the full titles of the European Standards and Council Directive.

4.1.2. Use-specific risk mitigation measures

4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid instructions

IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.

IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.

IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.

IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.

4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging

Dispose of in accordance with relevant local regulations.

4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

See General Directions for use.

5. GENERAL DIRECTIONS FOR USE OF THE META SPC 13

5.1. Instructions for use

See use-specific instructions for use.

Inform the authorisation holder if the treatment is ineffective

5.2. Risk mitigation measures

Access to bystanders / animals should be restricted during application.

5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

Environmental precautions

Prevent liquid from entering sewers or surface waters.

5.4. Instructions for safe disposal of the product and its packaging

See specific to the use, the instructions for safe disposal of the product and its packaging.

5.5. Conditions of storage and shelf-life of the product under normal conditions of storage

Storage conditions: Store in original container, at room temperature. Keep away from heat and direct sunlight. Protect from frost.

Shelf-life: 12 months

6. OTHER INFORMATION

Professionals (including industrial, professionals) mean trained professional if this is required by national legislation.

Please be aware of the European reference value of 1,25 mg/m 3 for hydrogen peroxide (CAS No.: 7722-84-1) which was used for the risk assessment for the biocidal product family (please be aware that relevant lower national limit values may apply).

Please be aware of the European reference value of 2 mg/m 3 (STEL) for phosphoric acid (CAS No.: 7664-38-2) which was used for the risk assessment for the biocidal product family.

7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 13

7.1. Trade name(s), authorisation number and specific composition of each individual product

Footnotes

1. . ELI: . ↩ ↩²

2. ECHA opinion of 11 September 2025 on the Union authorisation of ‘Christeyns Peracetic Acid Biocidal Product Family’ (ECHA/BPC/496/2025), . ↩ ↩²