32004R1241 | Council Regulation (EC) No 1241/2004 of 5 July 2004 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products

of 5 July 2004

amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products

Preamble

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 26 thereof,

Having regard to the proposal from the Commission,

Whereas:

(1) It is in the interest of the Community to suspend partially or totally the autonomous Common Customs Tariff duties for a number of new products not listed in the Annex to Regulation (EC) No 1255/96 ¹ .

(2) A number of products should be withdrawn from the list in the Annex to Regulation (EC) No 1255/96 because it is no longer in the Community's interest to maintain suspension of autonomous Common Customs Tariff duties or because the description needs to be altered in the light of technical developments.

(3) Products whose description needs to be altered should be regarded as new products.

(4) It is therefore appropriate to amend Regulation (EC) No 1255/96 accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EC) No 1255/96 is hereby amended as follows:

1. The products set out in Annex I to this Regulation are inserted in the Annex to Regulation (EC) No 1255/96.

2. The products for which the codes are set out in Annex II to this Regulation are deleted from the Annex to Regulation (EC) No 1255/96.

Article 2

This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union .

It shall apply with effect from 1 July 2004.

Final provisions

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 5 July 2004. For the Council The President G. ZALM

¹ OJ L 158, 29.6.1996, p. 1 . Regulation as last amended by Regulation (EC) No 2285/2003 ( OJ L 341, 30.12.2003, p. 1 ).

CN code	TARIC	Description	Rate of autonomous duty (%)
ex 2812900020	20	Silicon tetrafluoride	0
ex 2903308050	50	1,1,1,3,3-Pentafluoropropane, for use as non-flammable liquid blowing agent in the formation of insulating foams ¹	0
ex 2903308060	60	Octafluoropropane	0
ex 2905190030	30	2,6-Dimethylheptan-4-ol	0
ex 2909190030	30	Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more	0
ex 2912420010	10	Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)	0
ex 2914700040	40	Perfluoro(2-methylpentan-3-one)	0
ex 2915399050	50	3-Acetylphenyl acetate	0
ex 2920901030	30	4-Ethyl-1,3-dioxolan-2-one	0
ex 2921290040	40	N,N'-Di-tert-butylethylenediamine	0
ex 2922198050	50	2-(2-Methoxyphenoxy)ethylamine	0
ex 2923900080	80	Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride	0
ex 2925199520	20	N-(9-Fluorenylmethoxycarbonyloxy)succinimide	0
ex 2928009080	80	Cyflufenamid (ISO)	0
ex 2930907088	88	Methylene dithiocyanate	0
ex 2932190070	70	Furfurylamine	0
ex 2932190075	75	Tetrahydro-2-methylfuran	0
ex 2932190080	80	Octafluorotetrahydrofuran	0
ex 2932997060	60	Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate	0
ex 2933993020	20	5H-Dibenz[b,f]azepine-5-carbonyl chloride	0
ex 2934999072	72	1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione	0
ex 2934999073	73	N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide	0
ex 2935009015	15	Flupyrsulfuron-methyl-sodium (ISO)	0
ex 2935009025	25	Triflusulfuron-methyl (ISO)	0
ex 2935009035	35	Chlorsulfuron (ISO)	0
ex 2935009045	45	Rimsulfuron (ISO)	0
ex 2935009055	55	Thifensulfuron-methyl (ISO)	0
ex 2935009065	65	Tribenuron-methyl (ISO)	0
ex 2935009075	75	Metsulfuron-methyl (ISO)	0
ex 2935009087	87	4'-Sulfamoylacetanilide	0
3206 50 00		Inorganic products of a kind used as luminophores	0
ex 3207408030	30	Glass frit, for use in the manufacture of cathode-ray tubes ¹	0
ex 3215110010	10	Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments	0
ex 3215190010	10
ex 3215908030	30	Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading No 8443 ¹	0
ex 3707903020	20	Toner, based on a polyol resin, in the form of powder	0
ex 3707903030	30	Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins	0
ex 3801209010	10	Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes ¹	0
ex 3814009020	20	—: 69 % or more but not more than 71 % of 1-methoxypropan-2-ol,	0
ex 3814009030	30	Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether	0
ex 3815199035	35	—: 55 % or more but not more than 60 % of copper oxide	0
ex 3824909992	92	Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene= carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations	0
ex 3824909993	93	Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol	0
ex 3824909994	94	Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate	0
ex 3824909995	95	Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols	0
ex 3901209030	30	Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 °C/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens ¹	0
ex 3904610030	30	Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m 2 /g or more but not exceeding 12 m 2 /g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm	0
ex 3906909050	50	—: chloromethyl vinyl ether,	0
ex 3907209945	45	Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups	0
ex 3907209950	50	Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups	0
ex 3911909975	75	Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 325 μm or more but not exceeding 575 μm	0
ex 3926909975	75
ex 3911909980	80	Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene]	0
ex 3916909010	10	Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames ¹	0
ex 3920102640	40	Film of polyethylene, of a kind used for typewriter ribbon	0
ex 3920431096	96	Film, of a specular gloss of 70 or more measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances ¹	0
ex 3920621901	01	Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black	0
ex 3920621903	03
ex 3920621904	04	Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes ¹	0
ex 3920621906	06
ex 3920621907	07	—: only dyed in the mass, or	0
ex 3920621909	09
ex 3920621911	11	Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0
ex 3920621913	13
ex 3920621914	14	Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 30 μm, coated on one side with silicone, for use in the manufacture of window film ¹	3
ex 3920621916	16
ex 3920621917	17	Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material	0
ex 3920621919	19
ex 3920621921	21	Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm ¹	0
ex 3920621923	23
ex 3920621924	24	—: contains a colouring and/or UV-absorbing material throughout the mass	0
ex 3920621926	26
ex 3920621927	27	Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 3701 20 00 ¹	0
ex 3920621929	29
ex 3920621931	31	Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 3701 20 00 ¹	0
ex 3920621933	33
ex 3920621934	34	Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more ¹	0
ex 3920621936	36
ex 3920621937	37	Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm	0
ex 3920621939	39
ex 3920621941	41	—: a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method)	0
ex 3920621943	43
ex 3920621944	44	Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m 2 or more but not exceeding 26,7 g/m 2 , for use in the manufacture of photo-resist film ¹	0
ex 3920621946	46
ex 3920621947	47	Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm)	0
ex 3920621949	49
ex 3920621951	51	Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10 000 ohms (per square) (as determined by the ASTM D 257-93 method)	0
ex 3920621953	53
ex 3920621954	54	Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45 o and 18 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1 600 mm or more	0
ex 3920621956	56
ex 3920621957	57	Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer	0
ex 3920621959	59
ex 3920621961	61	Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm 2 (± 2 kg/mm 2 ) and a tensile strength (in the machine direction) of more than 28 kg/mm 2 , and of an anti-adherent coating	0
ex 3920621963	63
ex 3920621967	67	Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm	0
ex 3920621969	69
ex 3920621974	74	Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N,N'-diphenyl-N,N'-di-m-tolylbiphenyl-4,4'-ylenediamine	0
ex 3920621976	76
ex 3920629031	31	Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm)	0
ex 3920629033	33
ex 3921906093	93	Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances ¹	0
ex 3926909985	85	Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 3,3 μm	0
ex 5803100091	91	Gauze of cotton, of a width of less than 1 500 mm	0
ex 6914909030	30	Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm	0
ex 7019909920	20	Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)	0
ex 7606111020	20	Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles	0
ex 8505199032	32	Magnet, for use in the manufacture of deflection yokes ¹	0
ex 8522905995	95	Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units ¹	0
ex 8522909845	45	Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 ¹	0
ex 8522909847	47	Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8520, 8521, 8526, 8527, 8528 or 8543 ¹	0
ex 8548909045	45
ex 8525309030	30	Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels not exceeding 440 000 , for use in CCTV surveillance systems ¹	0
ex 8528219020	20	Liquid cristal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94	0
ex 8529908140	40	Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors ¹	0
ex 8540111193	93	Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm	0
ex 8544601010	10	Anode cap cable, for use in the manufacture of fly back transformers ¹	0
ex 8548909046	46	Optical unit, consisting at least of a laser diode and a photodiode, operating at a typical wavelength of 654 nm or more but not exceeding 787 nm	0
ex 9032899020	20	Electronic controller of eletric power steering (EPS controller)	0

¹ Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.

CN code	TARIC
ex 3215 90 80	30
ex 3904 30 00	20
ex 3906 90 90	50
ex 3920 43 10	96
ex 3920 62 19	05
ex 3920 62 19	10
ex 3920 62 19	15
ex 3920 62 19	25
ex 3920 62 19	30
ex 3920 62 19	35
ex 3920 62 19	40
ex 3920 62 19	45
ex 3920 62 19	50
ex 3920 62 19	55
ex 3920 62 19	60
ex 3920 62 19	62
ex 3920 62 19	64
ex 3920 62 19	65
ex 3920 62 19	70
ex 3920 62 19	75
ex 3920 62 19	80
ex 3920 62 19	81
ex 3920 62 19	85
ex 3920 62 19	87
ex 3920 62 19	89
ex 3920 62 90	30
ex 3921 90 60	93
ex 3923 10 00	10
ex 7006 00 90	40
ex 7616 99 90	40
ex 8419 89 98	20
ex 8424 89 95	10
ex 8424 89 95	20
ex 8460 21 90	10
ex 8460 40 10	10
ex 8460 90 90	10
ex 8460 90 90	20
ex 8463 90 00	10
ex 8464 20 19	10
ex 8479 89 98	10
ex 8479 89 98	20
ex 8479 89 98	30
ex 8522 90 59	95
ex 8522 90 98	45
ex 8522 90 98	47
ex 8528 21 90	20
ex 8529 90 81	40
ex 8540 11 11	93
ex 8543 89 95	58
ex 8548 90 90	45
ex 9031 80 34	10
ex 9031 80 39	30
ex 9031 80 99	10
ex 9031 90 80	20
ex 9031 90 80	40
ex 9031 90 80	50

Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions. ↩ ↩² ↩³ ↩⁴ ↩⁵ ↩⁶ ↩⁷ ↩⁸ ↩⁹ ↩¹⁰ ↩¹¹ ↩¹² ↩¹³ ↩¹⁴ ↩¹⁵ ↩¹⁶ ↩¹⁷ ↩¹⁸ ↩¹⁹ ↩²⁰ ↩²¹ ↩²² ↩²³ ↩²⁴ ↩²⁵

Council Regulation (EC) No 1241/2004 of 5 July 2004 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products

Preamble

Article 1

Article 2

Final provisions

Footnotes

Continue your research in ChatGPT or Claude