B&C SPEAKERS, NA, LLC et al v. PRV AUDIO GROUP, INC.

2:25-cv-03017Njd4 de mar. de 2026

Abrir fonte

Texto completo

1
UNITED STATES DISTRICT COURT
DISTRICT OF NEW JERSEY
B&C SPEAKERS S.P.A. AND B&C
SPEAKERS, NA, LLC,
Plaintiffs, Civil No.: 25-cv-3017 (KSH) (JSA)
v.
PRV AUDIO GROUP, INC.,
Defendant.
OPINION
Katharine S. Hayden, U.S.D.J.
I. 	Introduction
In this action alleging trade dress infringement and related claims, plaintiffs B&C
Speakers S.p.A. (“B&C”) and B&C Speakers, NA, LLC (“B&C NA,” and with B&C,
“plaintiffs”) contend that defendant PRV Audio Group, Inc. (“PRV”) has advertised, sold,
marketed, and offered for sale numerous products that infringe plaintiffs’ speaker basket design.
Before the Court is defendant’s motion to dismiss for failure to state a claim. The motion is fully
briefed, and the Court decides it without oral argument.
II. 	Background
The complaint alleges as follows. B&C is an Italian company; B&C NA is its wholly
owned subsidiary and is located in Pompton Plains, New Jersey. (D.E. 1, Compl. ¶¶ 1-2.) B&C
describes itself as “one of the largest and most prestigious professional loudspeaker transducer
manufacturers in the world.” (Id. ¶ 9.) Together with B&C NA, it sells multiple speaker
products with “distinctive” designs, which it refers to as the “B&C Speaker Basket Design”
(hereafter, the “Design”). (Id. ¶¶ 10, 12, 14.) “One of B&C’s distinctive speaker designs,” the
complaint goes on, “is B&C’s 12NDL76 speaker, which is shown below and has been sold by
NOT FOR PUBLICATION
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 1 of 11 PageID:
<pageID>
2
B&C Speakers since at least as early as 2005[.]” (Id. ¶ 11.) 	The picture below followed:
The complaint goes on to describe the Design as including tapering support arms
terminating at a motor mount and evenly spaced oblong holes:
B&C’s unique design . . . includes [1] pairs of tapering and arching support arms
[1] that terminate at the magnetic motor mount [2] and extend to the circular front
mounting flange [3]. A pattern of ribs [4] and evenly spaced obround holes [5]
extend around the mounting flange [3]. A terminal tab [6] is integral to the basket
and adjacent to the base basket flange [7].
(Id. ¶ 12.) The following diagram was provided:
Plaintiffs assert that the specific features of the Design are non-functional and
ornamental. (Id. ¶ 13.) Using the support arms and holes as an example, they contend that while
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 2 of 11 PageID:
<pageID>
3
such features “may offer functionality in general, the specific and unique design of these features
in the B&C Speaker Basket Design, such as tapering and arched arms and evenly-spaced oblong
holes, do not offer any functionality.” (Id.)
The Design trade dress has, according to Plaintiffs, “been continuously used and
marketed for more than eighteen (18) years as being affiliated with B&C,” including at trade
shows, in brochures and catalogs, in online images, and in industry publications. (Id. ¶¶ 15-16.)
The B&C products with the Design “have been B&C’s best-selling cone speaker products,” and
they have received industry awards and favorable reviews from an industry publication. (Id. ¶¶
18-19.) On consumers’ association of the Design with plaintiffs, the complaint alleges:
Given B&C’s lengthy use of the B&C Speaker Design that extended to multiple
products, extensive advertising and promotion including the B&C Speaker
Design, industry recognition, and overall fame and purchaser recognition of the
B&C Speaker Basket Design, the B&C Speaker Design is recognizable trade
dress that serves to identify to purchasers that the speakers originate from or are
affiliated with a single source.
(Id. ¶ 21.) Moreover, the complaint continues, purchasers “often view a speaker design in
making a purchasing decision,” providing an example of a website on which a consumer can see
the Design in a speaker listed for sale on the site. (Id. ¶ 22.) B&C purports to be the “exclusive
owner of protected common law trade dress rights in” the Design, and that it has stopped other
companies from infringing and unauthorized use of the Design through its efforts at
“enforcement and policing.” (Id. ¶¶ 23-24.)
The exception is the defendant here, PRV, which plaintiffs allege is their competitor “in
at least the consumer car audio market.” (Id. ¶ 25.) PRV has, they continue, “advertised,
marketed, offered for sale, and sold” various products that allegedly infringe the Design. (Id. ¶
26.) The complaint offers side-by-side comparisons of various of these and Plaintiffs’ speakers.
(Id. ¶¶ 27-29 & Ex. C.) The parties’ respective products are “advertised and sold in the same
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 3 of 11 PageID:
<pageID>
4
trade channels, which include certain websites, retail stores, and trade shows. (Id. ¶¶ 30-32.)
On June 20, 2023, B&C sent a cease and desist letter to PRV requesting that it stop
manufacturing or importing a specific PRV speaker, the 18X-2, and sell off its existing inventory
within a commercially reasonable time. (Id. ¶ 36.) PRV nonetheless continued to sell its
products. (Id. ¶ 37.)
On April 22, 2025, plaintiffs filed their four-count complaint against PRV, alleging trade
dress infringement, false designation of origin, and unfair competition under § 43(a) of the
Lanham Act, 15 U.S.C. § 1125(a) (Count I), and under New Jersey’s trademark infringement
statute, N.J.S.A. § 56:3-13.16 (Count II); unfair competition under New Jersey’s unfair
competition statute, N.J.S.A. § 56:4-1 (Count III); and common law trademark infringement and
unfair competition (Count IV). (D.E. 1.) PRV has moved to dismiss the complaint under Fed.
R. Civ. P. 12(b)(6), arguing that plaintiffs have failed to plead, and cannot plead, factual
allegations supporting essential elements of their claims, including protectable trade dress (i.e.,
that the Design is non-functional and distinctive) and a likelihood of consumer confusion
between PRV’s products and the Design. (D.E. 20-1, Moving Br.) PRV further asserts that its
speakers come in different designs and different features, but plaintiffs “fail to plead which
particular elements of PRV’s speaker designs” infringe the claimed trade dress. (Id. at 5.)
In opposing (D.E. 23), plaintiffs argue that the complaint articulates the claimed trade
dress with sufficient particularity and adequately pleads that it is ornamental, non-functional and
has secondary meaning, and that even if the pleading is deficient, any dismissal should be
without prejudice. PRV replies that plaintiffs’ arguments do not overcome the sparsity of the
pleaded factual allegations, particularly in describing the claimed trade dress, and that controlling
case law requires dismissal here. (D.E. 25, Reply Br.)
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 4 of 11 PageID:
<pageID>
5
III. 	Standard of Review
To withstand dismissal under Fed. R. Civ. P. 12(b)(6), a complaint must plead a plausible
claim for relief, which means the plaintiff has pleaded “‘factual content that allows the court to
draw the reasonable inference that the defendant is liable for the misconduct alleged.’” Kalu v.
Spalding, 113 F.4th 311, 324-25 (3d Cir. 2024) (quoting Ashcroft v. Iqbal, 556 U.S. 662, 678
(2009)). In conducting that assessment, the well-pled factual allegations are assumed as true and
reasonable inferences are drawn in plaintiffs’ favor. Id. at 325; Tatis v. Allied Interstate, LLC,
882 F.3d 422, 426 (3d Cir. 2018)). “[T]hreadbare recitals of the elements of a cause of action,
legal conclusions, and conclusory statements” are disregarded in determining whether this
standard is met. City of Cambridge Ret. Sys. v. Altisource Asset Mgmt. Corp., 908 F.3d 872,
878-79 (3d Cir. 2018) (cleaned up).
IV. 	Discussion
Trademarks connect goods with their sources in the minds of consumers. PIM Brands
Inc. v. Haribo of Am., Inc., 81 F.4th 317, 321 (3d Cir. 2023) (“Trademarks protect buyers and
sellers by flagging the goods’ source.”).1 Trade dress is a “subset of trademark” that “protects
distinctive choices (like size, shape, and color) that make up ‘the overall look of a product.’” Id.
(quoting Ezaki Glico, 986 F.3d at 255). The Third Circuit has summarized what trade dress is
and why it is protectable:
1 Plaintiffs have asserted four claims, and PRV has moved to dismiss all of them. The parties’
briefing, however, focuses on the standards for the Lanham Act claim, and recognizes that the
remaining claims are subject to the same arguments. This Court follows suit, and because (as
explained infra) the Lanham Act claim cannot proceed as currently pleaded, the remaining
claims must similarly be dismissed. Accord Ezaki Glico Kabushiki Kaisha v. Lotte Int’l Am.
Corp., 986 F.3d 250, 255 (3d Cir. 2021) (“New Jersey’s unfair-competition and trademark laws
are not significantly different from federal law, so our analysis of [plaintiff’s] Lanham Act
claims applies equally to dispose of its state-law claims. . . . Following the parties’ lead, we focus
on federal trademark law.”).
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 5 of 11 PageID:
<pageID>
6
“Trade dress” refers to the design or packaging of a product which serves to
identify the product’s source. It is the total image or overall appearance of a
product, and includes, but is not limited to, such features as size, shape, color or
color combinations, texture, graphics, or even a particular sales technique. The
purpose of trade dress protection is to secure the owner of the trade dress the
goodwill of his business and to protect the ability of consumers to distinguish
among competing producers.
McNeil Nutritionals, LLC v. Heartland Sweeteners, LLC, 511 F.3d 350, 357 (3d Cir. 2007)
(internal citations and quotation marks omitted). The law’s protection of trade dress does not
extend to functional features because it “is not intended to create patent-like rights in innovative
aspects of product design. If it did, it could override restrictions on what is patentable and for
how long.” Ezaki Glico, 986 F.3d at 256 (cleaned up). See also Shire US Inc. v. Barr Labs.,
Inc., 329 F.3d 348, 353 (3d Cir. 2003) (“The functionality doctrine ‘accommodates the twin
purposes behind the Lanham Act. It protects the manufacturer (and the consumer) from the
copying of those features that signify a product’s source (and quality) and encourages
competition by preventing one manufacturer from acquiring a monopoly by attempting to
trademark those features of a design essential to a successful product of that type.’”).
This line-drawing is reflected in the elements necessary to state a claim for trade dress
infringement under § 43(a) of the Lanham Act, the federal statute setting forth “the standard for
infringement of unregistered trademarks.” Fair Wind Sailing, Inc. v. Dempster, 764 F.3d 303,
308 (3d Cir. 2014). A plaintiff asserting such a claim must plead that “(1) the allegedly
infringing design is non-functional; (2) the design is inherently distinctive or has acquired
secondary meaning; and (3) consumers are likely to confuse the source of the plaintiff’s product
with that of the defendant’s product.” McNeil Nutritionals, 511 F.3d at 357; 15 U.S.C. §
1125(a)(3) (trade dress plaintiff “has the burden of proving that the matter sought to be protected
is not functional”).
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 6 of 11 PageID:
<pageID>
7
The plaintiff must also describe the trade dress with specificity; that is, “to articulate the
specific elements which comprise its distinct dress.” Fair Wind, 764 F.3d at 309 (cleaned up).
“[T]he discrete elements which make up the [trade dress claim] should be separated out and
identified in a list.” Id. (quoting 1 J. Thomas McCarthy, McCarthy on Trademarks and Unfair
Competition § 8:3 (4th ed. 2014)). This description should show that the plaintiff is “seek[ing]
protection of visual elements of its business” rather than protection of “an unprotectable style,
theme or idea.” Id. (cleaned up).
Plaintiffs point to paragraph 12 of the complaint for this listing of the elements and a
drawing of their trade dress. (D.E. 23, Pl.’s Opp. 2, 4-6.) That paragraph, again, reads as
follows:
B&C’s unique design . . . includes [1] pairs of tapering and arching support arms
[1] that terminate at the magnetic motor mount [2] and extend to the circular front
mounting flange [3]. A pattern of ribs [4] and evenly spaced obround holes [5]
extend around the mounting flange [3]. A terminal tab [6] is integral to the basket
and adjacent to the base basket flange [7].”
(Compl. ¶ 12.) Accepting for the moment that this description is adequate,2 plaintiffs have a
fundamental problem: the complaint fails to plead facts showing that their trade dress is non-
functional. As a consequence, dismissal is warranted.
Functionality is analyzed “not at the level of the entire product or type of feature, but at
the level of the particular design chosen for feature(s).” Ezaki Glico, 986 F.3d at 257. That is,
the product as a whole may be functional, but the particular “shape and form” chosen for its
features may mean that those features are not functional. Id.
A feature is “functional” if it is “useful,” which can mean the feature is “essential” to the
article’s use or purpose, or that the feature affects the article’s cost or quality. Ezaki Glico, 986
2 PRV argues that it is not. (D.E. 20-1, Moving Br. 3; D.E. 25, Reply Br. 3-4, 6-7.)
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 7 of 11 PageID:
<pageID>
8
F.3d at 255, 257. A feature is also “useful” if exclusive use of it “would put competitors at a
significant non-reputation-related disadvantage.” Id. at 257. A feature that is “merely an
ornamental, incidental, or arbitrary aspect” of the article does not qualify as “useful.” Id. Certain
types of information about the feature can help determine whether it is “useful” or not—
including evidence that a “feature or design makes a product work better”; that the marketing of
the product “touts a feature’s usefulness”; that a utility patent covers the features; or that the
product could only be designed in a few ways (or, on the other hand, that there are “other
workable designs”). Id. at 258.
A court undertaking this inquiry at the motion to dismiss stage must be able to infer from
the pleaded factual allegations that a feature’s purpose or operation is aesthetic or ornamental,
rather than useful. A case both sides cite, I.M. Wilson, Inc. v. Otvetstvennostyou “Grichko”, 500
F. Supp. 3d 380 (E.D. Pa. 2020) (Pratter, J.), is illustrative. There, the product was ballet shoes,
and from the complaint allegations and the context supplied in the description of the trade dress,
the court could draw reasonable inferences about which aspects of the design choices for the
ballet shoes were functional and which were not:
Certain aspects of the alleged trade dress could be seen as inherently functional
(i.e., “the unique identifier number” used to identify the cobbler that inspected the
shoes, the placement and orientation of the size and width markings). Even so,
other aspects of the trade dress are plausibly inherently aesthetic (i.e., the pink
satin trim, white inner sole, stitch patterns, and diamond sole mark)22 —and thus
nonfunctional.
22 Grishko alleges that the diamond pattern on the sole is not designed for traction
or any other functional purpose and is purely aesthetic.
Id. at 408-09 & n. 22.
This Court cannot draw similar inferences from the spare allegations in plaintiffs’
complaint. Instead, the complaint conclusorily asserts that the Design “does not provide any
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 8 of 11 PageID:
<pageID>
9
functionality to the speaker” and that as an example, “support arms and holes may offer
functionality in general,” but “tapering and arched arms and evenly-spaced oblong holes do not.”
(Compl. ¶ 13.) The purpose of “support arms” as part of a speaker is not apparent, so whether
“tapering and arched” arms are a design choice or a function choice is similarly unclear.
Contrast this to, for example, the “unique identifier number” on the ballet shoes, that logically
could identify a cobbler (functional), or to color choices and stitch patterns for parts of the ballet
shoe (which one could reasonably infer to be non-functional). Simply labeling an element “non-
functional” and “ornamental,” as plaintiffs’ paragraph 13 does, is insufficient here for the Court
to reasonably infer why that would be so.3
Plaintiffs argue that trade dress “protects distinctive choices (like size, shape, and color)”
(D.E. 23, Pls.’ Opp. 10 (quoting PIM Brands, 81 F.4th at 321)), but it is not apparent from the
complaint what aspects or features of the Design were a choice, as opposed to necessary for or
integral to any similar speaker. PRV cites an excerpt from Voice Coil, an industry publication,
that appears in Exhibit B to the complaint as proof that the Design is functional. The excerpt
describes the frame of a particular B&C speaker as “very much part of the cooling system,” and
goes on to discuss the six double spokes that are coupled to the ring magnet motor structure, the
venting system, pole vent, and vent holes, “which, when taken together, provide substantial air
flow throughout the motor structure.” (Compl., Ex. B, at 10 of 26.)4 Although the Court does
3 Plaintiffs analogize their allegations to those made in Azurous, Inc. v. Kennedy Int’l, Inc.
(“Azurous II”), 2025 WL 1502077 (D.N.J. May 27, 2025) (Quraishi, J.), in which a trade dress
infringement claim concerning a travel pillow survived a motion to dismiss. (See D.E. 23, Pls.’
Opp. 10.) But the factual allegations there were far more robust and spoke directly to
considerations relevant to the functionality analysis. They included factual assertions, for
example, explaining that the identified features did not impact cost or quality and how
competitors could offer products with the same function that did not have the features plaintiff
had identified as its trade dress. See Azurous II, 2025 WL 1502077, at *6-7.
4 This pagination refers to the page numbers assigned by the CM/ECF system.
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 9 of 11 PageID:
<pageID>
10
not consider this excerpt for the truth of the statements in it—plaintiffs have relied on it to show
how they advertised, not to show the Design’s functionality or non-functionality (Compl. ¶ 17)—
it does illustrate the dearth of detail in plaintiffs’ description of their trade dress if they want to
avoid the functionality bar. For example, the complaint simply states that the Design has
“obround holes.” (Compl. ¶ 12.) It is silent on what they do, or don’t do, and why an “obround”
shape was chosen. In contrast, the article suggests a purpose by calling them “vent holes.” See
Azurous, Inc. v. Kennedy Int’l, Inc. (“Azurous I”), 2024 WL 3219663, at *9 (D.N.J. June 28,
2024) (Quraishi, J.) (taking account of how the plaintiff described its product on its website in
considering functionality). The complaint allegations simply do not equip the Court with
information that would permit it to reasonably infer that the holes have an aesthetic, rather than
useful, purpose.
Plaintiffs’ other arguments in opposition are similarly unavailing. That PRV sells other
speakers “that do not fully incorporate the [Design],” which they argue shows that “such features
are not required” (D.E. 23, Pls.’ Opp. 3, 12 (citing Compl. ¶ 35)), does not move the needle
because the features included or excluded in those other speakers is left unspecified. That
plaintiffs received a European Union Community Design Registration, which they offer as
support for a conclusion that the Design is non-functional and ornamental (see Compl. ¶ 13 &
Ex. A; D.E. 23, Pls.’ Opp. 13), is unhelpful as presented; the parties dispute what the existence of
that registration indicates and the standards for its issuance, and in any event, the exhibit is
entirely in Italian.
Plaintiffs are correct that protectible trade dress may be found in a “combination of
functional and non-functional features . . . so long as the non-functional features help make the
overall design distinctive and identify its source.” (D.E. 23, Pls.’ Opp. 13-14 (quoting Ezaki
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 10 of 11 PageID:
<pageID>
11
Glico, 986 F.3d at 258).) But what plaintiffs have pleaded still does not satisfy that standard. If
the design chosen, considered in its entirety, “both promotes a brand and also ‘makes a product
work better,’ it is functional and unprotectable.” PIM Brands, 81 F.4th at 321. The complaint
allegations simply say, in essence, that this isn’t the case, without showing why. Without that
piece, the claims cannot proceed.5
Dismissal will, however, be without prejudice. There is no indication that an amendment
adding the detail currently missing would be futile, or that another ground to deny amendment
exists. EBIN New York, Inc. v. KISS Nail Prods., Inc., 2024 WL 1328029, at *9 (D.N.J. Mar. 28,
2024) (Salas, J.) (dismissing without prejudice); see also Oxford House, Inc. v. Twp. of N.
Bergen, 158 F.4th 486, 495-96 (3d Cir. 2025) (reversing denial of leave to amend). The Court
also observes that the parties’ motion practice was directed to the original complaint, which the
Court had not previously ruled on. See EBIN, 2024 WL 1328029, at *8 (“Plaintiff has thus far
not amended its Complaint and this Opinion is the first judicial scrutiny of its allegations.”).
V. 	Conclusion
The motion to dismiss is granted, without prejudice to plaintiffs filing an amended
complaint within 14 days. An appropriate order will issue.
/s/ Katharine S. Hayden
Date: March 4, 2026 	Katharine S. Hayden, U.S.D.J.
5 As such, the court need not assess at this point whether plaintiffs have adequately pleaded
secondary meaning or likelihood of source confusion.
Case 2:25-cv-03017-KSH-JSA Document 43 Filed 03/04/26 Page 11 of 11 PageID:
<pageID>

Continue sua pesquisa no ChatGPT ou Claude

Conecte o Omnilex para pesquisar o corpus jurídico pelo seu assistente de IA.